7Mar, 2024
Distiller Setup

Setting Up the Water Distiller

Before you begin using your water distiller, it’s important to set it up correctly. Follow these steps:

  1. Unpack the water distiller carefully, ensuring all parts are intact, including the rubber ring.
  2. Wrap the rubber ring around the bottom of the glass container to provide stability on your counter surface.
  3. Position the water distiller on a stable and level surface near a power outlet. Avoid using extensions.


Initial Use

Prior to using the water distiller for the first time, it is recommended to run a cleaning cycle. Here’s how:

  1. Fill the water distiller with tap water and run a cycle set to 100 degrees, but discard the water afterwards. This helps to remove any manufacturing residues and ensures the cleanliness of the distiller.

Regular Maintenance

To keep your water distiller in good working condition, follow these maintenance steps:

  1. After each use, unplug the water distiller from the electricity.
  2. Allow the distiller to cool down completely before handling or cleaning.
  3. Empty any remaining water from the chamber and rinse it thoroughly. Do not get the plug or connections wet.
  4. Wipe down the exterior of the distiller with a damp cloth to remove any spills or stains.

Chamber Maintenance

To maintain the boiling chamber of your water distiller, follow these steps:

  1. Rinse and wipe out the boiling chamber after each use once it has cooled down using tap water and a nylon dish brush.
  2. Use a dry cloth to wipe the underside of the fan unit after each use to avoid potential corrosion.
  3. Never use abrasive cleaners, such as steel wool or steel soap pads, as they can damage the distiller.

Using the Residue Cleaner to Descale Boiling Chamber

Calcification and residue can build up on the bottom of the boiling chamber and should be removed every 2-4 weeks. Follow these instructions to do so:

  1. Pour enough hot water into the boiling chamber to cover the residue (at least 1 liter).
  2. Add 1-4 teaspoons of Residue Cleaner, depending on the amount of residue.
  3. Disconnect and remove the fan unit, then start a cycle by pushing the front button.
  4. Once boiling, leave the distiller running for a few minutes before turning it off at the wall.
  5. Carefully pour out the water and wash the inside of the boiling chamber with tap water.
  6. If residue is not completely removed, you can repeat the process. Some residue may be difficult to remove depending on your tap water quality.

    Important Safety Notice

    When running a cleaning cycle, never put the fan unit on top of the boiling chamber. Additionally, do not allow all the water to fully boil and evaporate out of the boiling chamber, as this can occur if the machine is left running unattended.

    By following these instructions, you can ensure the proper maintenance and servicing of your water distiller, allowing you to enjoy clean and purified water for years to come.

Guide to Replacing Your Activated Carbon Filter

Water distillers are a popular choice for purifying water at home, providing clean and safe drinking water. One important component of a water distiller is the activated carbon filter. This filter plays a crucial role in removing impurities and improving the taste of the distilled water.

Replacing the activated carbon filter is a simple process that can be done at home. Here’s a step-by-step guide to help you replace your activated carbon filter:

Step 1: Gather the necessary materials

Before you begin, make sure you have all the materials you need. This includes a new activated carbon filter, gloves, and a clean cloth.

Step 2: Turn off and unplug the water distiller

For safety reasons, it’s important to turn off and unplug the water distiller before replacing the filter.

Step 3: Locate the filter housing

The filter housing is usually located on the top or side of the water distiller. Consult your user manual if you’re unsure about the exact location. Clue: it’s where the clean water drips out!

Step 4: Remove the old filter

Carefully remove the old activated carbon filter from the filter housing. Dispose of it properly.

Step 5: Clean the filter housing

Using a clean cloth, wipe the filter housing to remove any debris or residue.

Step 6: Install the new filter

Take the new activated carbon filter and place it into the filter housing. Make sure it fits securely.

Step 7: Reassemble and test

Reassemble any parts that were removed during the process. Once everything is back in place, turn on the water distiller and run a test cycle to ensure the new filter is working properly.

It’s recommended to replace the activated carbon filter every 3-6 months, depending on usage and water quality. Regularly replacing the filter will help maintain the performance and efficiency of your water distiller.

By following this guide, you can easily replace the activated carbon filter on your water distiller and continue enjoying clean and great-tasting water.


Proper storage of your water distiller is important to maintain its longevity. Follow these guidelines:

  1. When not in use, store the water distiller in a clean and dry environment.
  2. Avoid storing the distiller near heat sources or in direct sunlight.
  3. Keep the distiller covered to prevent dust or debris from accumulating inside.


If you encounter any issues with your water distiller, it’s best to refer to the manufacturer’s manual for troubleshooting steps. Attempting to repair the distiller yourself may void the warranty.

Safety Precautions

When using and handling your water distiller, it’s important to prioritize safety. Follow these precautions:

  1. Always handle the water distiller with care to avoid injury or damage.
  2. Never operate the distiller without water in the glass container, as this could cause overheating.
  3. Keep the distiller out of reach of children and pets.

If you purchased the Alkaline Water Kit the setup is exactly the same. 

For Spares Please Click Me


water tap, brass, tap-2515657.jpg 14Jan, 2024
Water Fluoridation: History, Compounds, and Regulations + Removing It!

Water fluoridation in the United Kingdom has a rich history dating back to the 1950s when the first scheme was introduced in Birmingham. Since then, various regions have implemented water fluoridation programs to differing extents. It’s essential to recognize that decisions regarding water fluoridation are typically made locally, and not all areas in the UK have embraced this practice.

Types of Fluoride Compounds and Their Origins

Understanding the common fluoride compounds and their origins sheds light on the diverse applications of fluorine in various industries:

  1. Sodium Fluoride (NaF): Source: Naturally occurring in minerals like cryolite, also produced synthetically. Application: Used in toothpaste and water fluoridation.
  2. Calcium Fluoride (CaF2): Source: Found in minerals like fluorite. Application: Used in aluminum production, metallurgy, and optical component manufacturing.
  3. Hydrogen Fluoride (HF): Source: Industrially produced from fluorite or as a by-product in phosphoric acid and aluminum production. Application: Used in fluorocarbons, refrigerants, and various chemicals.
  4. Fluorosilicic Acid (H2SiF6): Source: By-product of the phosphate fertiliser industry. Application: Used in water fluoridation and various industrial processes.
  5. Aluminum Fluoride (AlF3): Source: By-product in aluminum manufacture. Application: Used in aluminum production, ceramics, and glass manufacturing.
  6. Fluorocarbons (CFCs, HCFCs, HFCs): Source: Synthetic compounds with fluorine, used in refrigeration and aerosol propellants. Application: Industrial refrigerants, solvents, and propellants.
  7. Perfluorooctanoic Acid (PFOA) and Perfluorooctanesulfonic Acid (PFOS): Source: Synthetic compounds used in non-stick cookware and waterproof fabrics. Application: Despite being phased out, they persist in the environment.
  8. Fluoride in Industrial Air Cleaning Scrubbers: Source: Emissions from industrial processes captured in air cleaning scrubbers. Application: Prevents environmental contamination by removing fluoride from industrial emissions.
  9. Fluorinated Pharmaceuticals, like fluoxetine (Prozac).
  10. Fluoride (All Forms) Melts Concrete! 


Water Fluoridation: A Chronological History and Regulations

A chronological overview highlights key milestones in water fluoridation history:

  • 1940s-1950s: United States
    Grand Rapids, Michigan initiated the first water fluoridation program in 1945. U.S. Public Health Service endorsed water fluoridation in 1950.
  • 1960s-1970s: United Kingdom
    Water fluoridation trials began in the UK in the 1960s. The Water (Fluoridation) Act of 1985 provided a legal framework.
  • 1980s-1990s: United States
    The Safe Drinking Water Act in 1974 granted EPA authority to regulate contaminants. In 2015, recommended fluoride levels were revised to 0.7 milligrams per liter.
  • 2000s-2010s: Australia
    Water fluoridation began in Australia in the 1950s. State governments mandate water fluoridation, leading to public debates.
  • 2020s: Canada
    Water fluoridation practices vary by province. Local municipalities decide on water fluoridation, causing differing practices.

Regulations and Mandates:

  • United Kingdom: The Water (Fluoridation) Act of 1985 guides England’s health authorities, with devolved decisions in Scotland and Wales.
  • Australia: State-level regulations, e.g., Queensland’s Water Fluoridation Act 2008.
  • Canada: Local decisions on fluoridation.
  • United States: EPA sets maximum allowable fluoride levels; local water authorities decide on fluoridation.


Water fluoridation continues to be a hot topic of debate, focusing on so-called ‘public’ health benefits, ethics, and individual choice. Legal framework and regulations adapt to address concerns while allegedly promoting oral health.  Understanding the history, compounds, and regulations surrounding water fluoridation is crucial for informed discussions on its benefits and risks.

Water Distillers: The Optimal Choice for Ensuring Pure and Safe Drinking Water

When it comes to securing the purest and safest drinking water, water distillers stand out as the superior option. The distillation process, involving the conversion of water into steam and subsequent condensation, is unparalleled in its efficacy for removing a wide spectrum of impurities.

Key Advantages of Water Distillers:

  1. Comprehensive Contaminant Removal:
    • The distillation process excels in eliminating minerals, heavy metals, fluoride, chlorine, graphene oxide, pharmaceuticals, mold, and various other impurities. This ensures that the water produced is exceptionally pure and free from a diverse range of contaminants.
  2. Versatility in Purification:
    • Water distillers effectively address a multitude of contaminants, making them versatile for creating a safe water supply. Whether targeting chemicals, pathogens, or emerging pollutants, the distillation method provides a thorough purification solution.
  3. Independence from Water Source Quality:
    • Water distillers are not dependent on the quality of the water source. Regardless of the initial contamination levels, the distillation process reliably produces water of high purity, making it a dependable choice for diverse water supplies.
  4. Minimal Maintenance Requirements:
    • Distillation systems have relatively straightforward maintenance requirements. Periodic cleaning and attention to essential components ensure consistent performance, making them a practical choice for hassle-free water purification.
  5. Energy Efficiency Considerations:
    • While distillation is acknowledged as energy-intensive, its energy efficiency can be optimized through advancements in technology and system design. Selecting modern distillation units can enhance the overall energy efficiency of the process.
  6. Elevated Assurance of Safety:
    • Water distillers provide an elevated level of assurance regarding water safety. The comprehensive removal of contaminants, including pharmaceuticals, mold, graphene oxide, and even Radiation contributes to the production of water that meets the highest standards of purity.


Reverse Osmosis (RO) vs. Zero Water Pitcher: A Comparative Analysis

1. Purification Process:

  • Reverse Osmosis (RO):
    • RO utilizes a semi-permeable membrane to filter out contaminants. Water is forced through the membrane, effectively removing minerals, heavy metals, and other impurities.
  • Zero Water Pitcher:
    • Zero Water pitchers use a combination of activated carbon and an ion exchange resin to reduce total dissolved solids (TDS), which includes minerals and some impurities.

2. Contaminant Removal:

  • Reverse Osmosis (RO):
    • RO systems are highly effective in removing a wide range of contaminants, including minerals, heavy metals, fluoride, chlorine, and other impurities. They can achieve a high level of purification, often exceeding 95% removal of dissolved solids.
  • Zero Water Pitcher:
    • Zero Water pitchers are effective in reducing TDS, including minerals, but they may not remove certain contaminants as comprehensively as RO systems. The performance can vary based on the initial water quality.

3. Wastewater Generation:

  • Reverse Osmosis (RO):
    • RO systems generate wastewater as a byproduct. The amount of wastewater produced depends on the system’s design and efficiency.
  • Zero Water Pitcher:
    • Zero Water pitchers do not generate wastewater during the purification process. They rely on gravity to filter water through the cartridge, with excess water collected in the pitcher.

4. Convenience and Ease of Use:

  • Reverse Osmosis (RO):
    • RO systems are typically installed under the sink or as point-of-use systems. They require professional installation and are not as portable or convenient as pitcher filters.
  • Zero Water Pitcher:
    • Zero Water pitchers are portable and easy to use. They don’t require installation, making them suitable for use in various settings. However, their capacity is limited to the pitcher size.

5. Maintenance:

  • Reverse Osmosis (RO):
    • RO systems require regular maintenance, including membrane replacement and periodic sanitization. Maintenance can be more involved compared to pitcher filters.
  • Zero Water Pitcher:
    • Zero Water pitcher filters need replacement at regular intervals. The frequency depends on water quality and usage. Replacement is generally straightforward.

6. Cost:

  • Reverse Osmosis (RO):
    • RO systems usually have higher upfront costs, including installation. They may also incur ongoing maintenance expenses.
  • Zero Water Pitcher:
    • Zero Water pitchers have lower initial costs and do not require professional installation. However, ongoing filter replacements contribute to long-term costs.

In conclusion, water distillers emerge as the optimal choice for those prioritizing safe and pure drinking water. Their unparalleled ability to remove a broad range of contaminants ensures that the water produced is of the highest quality, making them a reliable and effective solution for households and communities alike.

Timer Controlled Digital Water Distiller & Glass Jug + Free Next Day Delivery – £109.95

Browse Our Range